Victron Energy Skylla - 24/100 TG Charger - 230V [SDTG2401001]
One full rated output and one (1) 4 Amp output. Ā Charge voltage can be precisely adjusted to suit any battery system. Ā
The input for the charger is 230V at 50/60HZ. Ā Charge voltage can be measured directly on the battery terminals in order to compensate for voltage loss due to cable resistance.Ā
An external sensor allows to measure battery temperature and compensate charge voltage accordingly.
Features:
- Perfect chargers for any type of battery - Charge voltage can be precisely adjusted to suit any sealed or unsealed battery system. Ā In particular, sealed maintenance-free batteries must be charged correctly in order to ensure long service life. Ā Overvoltage will result in excessive gassing and venting of a sealed battery. Ā The battery will dry out and fail.
- Suitable for AC and DC supply (AC-DC and DC-DC operation)
- Every TG Charger has a microprocessor, which accurately controls the charging in three steps
- Use of TG Chargers as power supply - As a result of the perfectly stabilized output voltage, a TG Charger can be used as a power supply if batteries or large buffer capacitors are not available.
- Manufactured with a battery temperature sensor. Ā When connected, charge voltage will automatically decrease with increasing battery temperature.Ā
- In order to compensate for voltage loss due to cable resistance, TG Chargers are provided with a voltage sensor so that the battery always receives the correct charge voltage
Product Specifications
Victron Energy Skylla - 24/100 TG Charger - 230V [SDTG2401001]Ā Product Specifications
Technical Specifications:
- Ā Input Voltage - 230V AC
- Input Voltage Range - 185 to 264V AC
- Input Voltage Range - 180 to 400V DC
- Battery Capacity - 500 to 1000 Ah
- Ā Frequency - 45 to 65 Hz
- Battery Connection - M8 studs
- 230V AC Connection - Screw clamp (AWG 6)
- Dimensions (H x W x D) - 14.4" x 9.9" 10.1" (36.5 x 25 x 25.7 cm)
- Weight - 22 Lbs (10 kg)
In the Box:
- Charger
- Mounting brackets
- Temperature sensor with 4.9' (1.5 M) wire
- Instruction manualĀ
*Sold as an IndividualĀ
Once purchased and in use, this product is non-returnable.
Product Manual
Product Warranty
Victron Energy Product Warranty
Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the end-user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead-acid batteries; 2 years from date of purchase by the end-user, with a maximum of 30 months from the Victron Energy invoice date, Lithium batteries; 3 years from date of purchase by the end-user. In addition to this, proof of correct battery usage is required when making a battery warranty claim.
For a 10% surcharge on the net price for products that came with a 5-year warranty, an additional 5 years of warranty can be purchased, bringing the total warranty to 10 years. Warranty extensions need to be applied for ultimately one year before expiration of the original term.
During the warranty period, Victron Energy will, at its discretion, repair, replace or credit the defective product free of charge. The warranty does not include performing or reimbursing deāinstallation, transportation, and reāinstallation. This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like:
ā¢ Reverse of battery polarity.
ā¢ Inadequate connection.
ā¢ Mechanical shock or deformation.
ā¢ Contact with liquid or oxidation by condensation.
ā¢ Use in an inappropriate environment(dust, corrosive vapor, humidity, high temperature, biological infestation...).Ā
ā¢ Breakage or damage due to lightning.
ā¢ Connection terminals and screws destroyed or other damages, like overheat, due to insufficient tightening.
ā¢ For any electronic breakage except due to lightning (reverse polarity, overāvoltage due to external cause), the state of the internal control diode and/or the input/output X and Y capacitors determine the warranty.
This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone else than Victron Energy or one of its authorized Repair Centres. In order to qualify for the warranty, the product must not be disassembled or modified.
Repair, replacement or credit are our sole remedies and Victron Energy shall not be liable for damages, whether direct, incidental, special, or consequential, even caused by negligence or fault.
Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers when performing warranty repairs or building replacement products. If Victron Energy repairs or replaces a part of a product, its warranty term is not extended.
All remedies and the measure for damages are limited to the above.
Victron Energy shall in no event be liable for consequential, incidental, contingent or special damages, even if having been advised of the probability of such damages. Any and all other warranties expressed or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited in duration to a period of five (5) years from the date of purchase, with the exception of batteries. For lead acid batteries a two (2) year period applies and for lithium batteries a three (3) year period applies.
Product FAQs
N/A
Top Authorized Dealer
Get it between - 
Chat Now
415-481-4075
