FranklinWH Generator-backup Smart Controller, 200 A, 120/240 Vac, withCTs. Works with the FranklinWH App
Description
FranklinWH Generator Module
Standby Generator Integration for Whole Home Energy Resilience
Though solar energy is a clean and renewable way tos upplement or replace grid power, sometimes there are extreme weather conditions where the grid goes down and the solar system isn't generating enough energy. Backup generators are a critical energy management source where those events are becoming more common. In the past, it has been difficult to integrate generators and solar power, but FranklinWH has addressed that need. The Franklin Home Power(FHP) energy management solution provides the ability to smoothly switch between the grid, solar, generators and battery backup to provide robust home energy management.
Integrated Power Management
- The generator can both power home loads and charge the aPower X battery.
Wide Adaptability
- Compatible with most models of standby generators. Applicable for new and retrofit installations.
Fast and reliable switchover to generator power during a grid failure is a major way in which the Generator Module benefits the household. In addition, generators can be noisy. During a longer outage, or when operating off-grid, generator auto start times can be scheduled through the FranklinWH app. You can run the generator during the day, when people aren't home, and switch to battery power at night, according to a pre-set schedule or through manual control.
Safe and reliable energy relies on multiple sources of power. The FHP Generator Module adds generators to provide a complete home energy management solution. Easy Installation
- The Generator Module is an optional aGate X component which can be easily installed without requiring any external components.
Better Experience
- Seamless and automatic generator switchover and remote manual control via the app
Compatible with any two-wire or utility sense standby generator, with or without ATS.
Automatic
- Set the aPower X battery State of Charge (SoC) limits for the generator to start and stop. The FHP will intelligently control the power sources to balance the generator and battery.
Manual
- Remotely start and stop the generator according to the household's immediate needs via the FranklinWH app
Product Specifications
FranklinWH Generator-backup Smart Controller, 200 A, 120/240 Vac, withCTs. Works with the FranklinWH App Product Specification
Product Manual
Product Warranty
FranklinWH Warranty
Twelve-Year Limited Warranty
It applies to the following FranklinWH System products (“Products” or “FranklinWH
System”)
*The aGate communications module, which supports Ethernet, Wifi, 4G, and Bluetooth, comes
with a limited warranty of up to 5 years. However, this warranty does not cover the continuity,
quality, strength, or coverage of 4G service at the location where the FranklinWH System is
installed.
The limited warranty includes a warranty period and performance warranty.
Warranty Period
FranklinWH warrants that your Products will be free from defects for twelve (12) years
starting from 1) the date of the initial installation; or 2) twelve (12) months from the
manufacture date, whichever comes first. FranklinWH will offer remedies according to
the Remedies section.
Performance Warranty
FranklinWH guarantees that the FranklinWH aPower X will have the rated energy
capacity of 13.6 kWh when this limited warranty begins, and the capacity retention will
be not less than 70% of the rated capacity when 1) the 12-year warranty period expires,
or 2) the aggregate energy throughput reached 43 MWh, whichever comes first.
Provided the products are installed and used as per the requirements in the installation
manual and the user manual.
Warranty Period
FranklinWH warrants that your Products will be free from defects for fifteen (15) years
starting from 1) the date of the initial installation; or 2) twelve (12) months from the
manufacture date, whichever comes first. FranklinWH will offer remedies according to
the Remedies section.
Performance Warranty
FranklinWH guarantees that the FranklinWH aPower 2 will have the rated energy
capacity of 15 kWh when this limited warranty begins, and the capacity retention will be
not less than 70% of the rated capacity when 1) the 15-year warranty period expires, or
2) the aggregate energy throughput reached 60 MWh, whichever comes first. Provided
the products are installed and used as per the requirements in the installation manual
and the user manual.
Remedies
If your FranklinWH System is defective within the warranty period, FranklinWH will, at its
sole discretion, repair or replace your faulty device (aPower/aGate) with an equivalent
product (new or refurbished). The remaining warranty period will be transferred to the
repaired or replacement product. Under no circumstances will the original warranty
period be extended as a result of your FranklinWH product being repaired or replaced.
FranklinWH can also refund you the actual purchase price of the defective products less
reasonable depreciation based on use at the time of the warranty claim when 1)
FranklinWH is unable to provide a replacement and repair is not commercially
practicable or cannot be timely made, or 2) You are willing to accept such a refund.
In the event of a defect, to the extent permitted by law, the above-mentioned repair,
replacement or refund are the sole and exclusive remedies that FranklinWH provide.
FranklinWH's responsibility under this warranty extends to valid service tickets or
replacement requests initiated before the expiration date of the warranty for items and
services covered by the warranty, even if the resolution occurs after the warranty period
has expired. All remaining liability shall terminate upon expiration of the warranty
period.
Warranty Exceptions
This Limited Warranty does not cover, and FranklinWH will not be liable for, any
defects, damages, or performance issues caused by, arising from, or related to any of
the following circumstances:
Misuse, Negligence, or Improper Use
- Damage due to improper use, misuse, abuse, negligence, unauthorized
modifications, or operating beyond intended conditions as outlined in product
documentation.
Shipping, Handling, and Storage Damage
Installation-Related Issues
- Installation performed by non-certified or unlicensed personnel, or installation
not adhering to FranklinWH installation instructions, guidelines, or applicable
local and federal electrical codes and standards. (Certification is required to
carry out installations. Learn more at: How Do I Get Certified)
Removal, relocation, reinstallation, or alteration of the product from its original
installation location without prior written consent from FranklinWH.
Unauthorized Repairs or Modifications
- Repair, disassembly, modification, tampering, or replacement attempts
performed by personnel not explicitly authorized by FranklinWH. Obtain
authorization by starting a service ticket and to ensure personnel are
FranklinWH Certified Installers.
Damage or defects arising from unauthorized third-party service or
maintenance actions.
Purchase from Unauthorized Channels
External and Environmental Factors
- Damage due to external environmental events, such as lightning, power surges,
floods, tidal waves, fires, earthquakes, storms, or other force majeure.
Installation in conditions outside of FranklinWH guidance, such as extreme
temperatures, humidity, altitude, or corrosive environments.
Physical or electrical stress beyond the documented operating conditions,
including exposure to abnormal voltage, power surges, or interference. For
detailed technical specifications, refer to the Product Data Sheet.
Failure to Report Issues in a Timely Manner
- Defects, damage, or performance problems not reported to FranklinWH or your
certified installer within two (2) months from the date of occurrence or
discovery.
Normal Wear, Tear, and Cosmetic Issues
- Regular wear, cosmetic imperfections, dents, scratches, glue marks,
discoloration, superficial defects, or cosmetic deterioration that do not
materially affect product performance or reliability. Paint should be limited to
external application for scratches and small damage as referenced in the
FranklinWH installation manuals.
Normal operating noise or vibration that is below 50 dB and does not adversely
affect system performance or reliability.
Remote Updates and Internet Connectivity
- To maintain the full warranty coverage (12-year or 15-year), your FranklinWH
System must maintain consistent internet connectivity allowing FranklinWH
to remotely update system software.
By installing the FranklinWH System and connecting it to the internet, you agree
to allow FranklinWH to perform these remote software updates without prior
notice, which may temporarily interrupt system operation.
If the FranklinWH System remains disconnected from the internet for more than
90 consecutive days, FranklinWH will issue a notification requesting
reconnection. If internet connectivity is not restored, the warranty period will
automatically reduce to a four-year limited warranty from the initial
installation date.
Unregistered Products
- FranklinWH Systems must be registered at the time of installation. Systems
that are not registered upon installation will only be eligible for a four-year
limited warranty from the installation date.
Product FAQs
N/A
Top Authorized Dealer
Get it between - 
Chat Now
415-481-4075
